Pearly glitter effect indoors and outdoors.
We recommend our PEARL additive for our REMIX footing and decorative plaster, to achieve a pearly effect on footing plasters containing either natural or coloured crushed stone.
For best results use primarily on surfaces with a single or homogeneous colour. For a more notable effect, we recommend using 1 mini tub (260 g) of additive for every 1 bucket (15 kg) of REMIX footing and decorative plaster, but, depending on the amount of further additives, this can be increased or decreased at will.
The substrate should have the same properties as those given for REMIX footing and decorative plaster intended for use.
The preparation and the priming to be carried out are the same as those for REMIX footing and decorative plaster intended for use.
1 jar (260 g) of PEARL additive per 1 bucket (15 kg) REVCO REMIX footing and decorative plaster is recommended.
Application temperature: During application and drying, the temperature of both the air and the wall surface must be between +5°C and +25°C.
Surface drying time: It is the same as that for the base plaster intended for use.
Total drying time: It is the same as that for the base plaster intended for use.
The values given are valid at 20°C temperature and 42% relative humidity. As the weather changes, with lower temperatures and higher humidity, the drying times become longer, with higher temperatures and lower humidity, the drying times become shorter.
Storage life: In original, unopened packaging in a dry place, the glitter additive may be stored indefinitely; it is not frost-sensitive.Packaging: 260 g
While drying, the agent must be protected from direct sunlight, draught, frost, driving rain, and temperatures above 25°C. Please refer to the technical information before application. Our technical specification is based on the premise that our products are used by trained professionals. The product and the information leaflet have been produced on the basis of our latest experience and knowledge, but this does not exempt the user from carrying out preliminary practical tests and colour checks. After starting the application, no complaints with respect to colour shall be accepted.
Avoid contact with skin and eyes; in case of contact, rinse thoroughly with water and consult a doctor if necessary.